You Make Me Happy Greeting Card

You Make Me Happy Greeting Card

This weeks project tutorial features Meant to Be Stamp set from Stampin’ Up!

You Make Me Happy Project Tutorial

Supplies:

  • Stamps – Meant To Be (148626)
  • Ink – Pool Party (147107), Calypso Coral (147101)
  • Paper – Calypso Coral (124392), Petal Pink (147009), Whisper White (106549),  Bird Ballad DSP (149592)
  • Other –Paper snips (103579), Stampin’ Dimensionals (104430), Be Mine Stitched Dies (148527), Flax Ribbon (148764). Hole Punch

Dimensions:

  • Calypso Coral CS: 5-7/8″ x 8-1/4″
  • Whisper White CS: Scrap piece
  • Petal Pink CS:  4″ x 3″
  • Bird Ballad DSP: 3-3/4″ x 5-7/8″

Directions:

  1. Die Cut large heart in Petal Pink CS
  2. Stamp heart image with Calypso Coral ink onto Whisper White CS and die cut using Be Mine Stitched Dies and die cutting machine
  3. Stamp greeting onto a scrap piece of Whisper White CS in Pool Party ink and cut around the stamped image.  Create a banner at each end using a pair of paper snips
  4. Punch a hole into the top of the Petal Pink heart.  Pull 2 threads from Flax Ribbon and time through the hole around the DSP and under the heart tying it off into a bow
  5. Adhere the Petal Pink heart to the DSP using Stampin’ Dimensionals.  Adhere the stamped heart onto the Petal Pink heart using adhesive of choice.
  6. Adhere your greeting using Stampin’ Dimensionals to the center of the stamped heart.
  7. Adhere the DSP to your card front leaving a border on the left side.  You’re Done!

You Make Me Happy Project Tutorial

You Make Me Happy Project Tutorial

 

Video Tutorial 

Tricks & Tips

  • Learn how to create a standard card base HERE

Supplies

I often get questions about what supplies I use in videos. To make it easier for my blog friends, all supplies are listed below! 🙂 click on the image you can purchase directly from my online store

 


Be sure to like my Facebook Page  for more fun project ideas HERE

Handmade Thinking of You Card

Handmade Thinking of You Card

Today I’m sharing a current favourite of mine, a handmade Thinking of You Card.  Before we move on let’s chat about the stamp set really quick.

I am using Butterfly Gala stamp set from Stampin’ up!   I LOVE this stamp set and coordinating punch, and I’ve also paired this project with the Be Mine Stitched Dies from the current  Occasion Catalogue.

Lucky for me this stamp set will be in the upcoming new Annual Catalogue.

Butterfly Gala - You've been on my mind

Supplies:

  • Stamps – Butterfly Gala (148580)
  • Ink – Lemon Lime Twist (147145), Balmy Blue (147105), Memento Black Ink (132708)
  • Paper – Daffodil Delight (121680), Balmy Blue (147007), Whisper White (106549), Vellum (106584), Gingham Gala DSP (148554)
  • Other –Butterfly Duet Punch (148523), Stampin’ Dimensionals (104430), Stitched Be Mine Dies (148527)

Dimensions:

  • Daffodil Delight CS: 5-7/8″ x 8-1/4″
  • Vellum CS: 5-1/4″ x 3-1/2″
  • Whisper White CS: Scrap piece
  • Balmy Blue CS:  1″ x 4″
  • Gingham Gala (Daffodil Delight pattern): 5-5/8″ x 1-1/2″,  (Grapefruit Gove Pattern) 4″ x 4″ pice

Directions:

  1. Stamp a large butterfly image onto scrap piece of Whisper White CS using Lemon Lime Twist ink, Stamp the body of the butterfly in Balmy Blue Ink.  Punch butterfly using Butterfly duet punch set aside.
  2. Die cut large heart with Grapefruit Grove DSP using Stitched Be Mine Dies and Die cutting machine.  Set aside
  3. Die cut border along the bottom of the Daffodil Delight DSP using the border die from Stitched Be Mine Dies and die cutting machine.  Set aside
  4. Stamp the small solid butterfly image with Balmy Blue ink randomly onto the Balmy Blue CS.
  5. Place the Vellum CS onto the Daffodil Delight card base for placement.  Adhere the Daffodil Delight DSP approx 1/2″ from the bottom  of the vellum using adhesive of choice.
  6. Adhere the stamped Balmy Blue butterfly CS to the top center of the Daffodil Delight DSP approx 1/2″ down from the top.
  7. Adhere the vellum to the Daffodil Delight card base using adhesive on the back only where the DSP and CS are, so not to show adhesive on the other side.
  8. Place the punched butterfly image centre of the die cut heart image for placement.  Using the butterfly as a guide carefully remove the butterfly and stamp the antennas in Black ink.  Adhere the butterfly to the heart using Stampin’ Dimensionals
  9. Adhere the die cut heart image to the card front using Stampin’ Dimensionals
  10. Stamp your greeting in black ink on a scrap piece of Whisper White CS, cut around with paper snips and adhere to the butterfly with liquid adhesive.  You’re Done!

Butterfly Gala - You've been on my mind Butterfly Gala - You've been on my mind

Video Tutorial 

 

Tricks & Tips

  • Learn how to create a standard card base HERE

Supplies

I often get questions about what supplies I use in videos. To make it easier for my blog friends, all supplies are listed below! 🙂 click on the image you can purchase directly from my online store

Be sure to like my Facebook page to view these tutorials live each week. HERE visit me at

Detailed with Love

Detailed with Love

This weeks project featuring multiple different returning favourites.  Let’s take a look:

Supplies:

  • Stamps – Detailed with Love (146606)
  • Ink – Rich Razzleberry (119981)
  • Paper – Rich Razzleberry (119981), Grapefruit Grove (146995), Very Vanilla (106550) cardstock, Delightfully Detailed Laser Cut Paper (146907), Delightfully Detailed Note Cards (146911)
  • Other –Faceted Dots (146910), Stampin’ Dimensionals (104430), Gold Mini Sequins Trim (144128)

Dimensions:

  • Rich Razzleberry CS: 5-7/8″ x 8-1/4″
  • Very Vanilla CS: 1-3/4″ x 1/2″ piece
  • Grapefruit Grove CS: Scrap piece
  • Gold Mini Sequins trim:  3″ piece

Directions:

  1. Stamp your greeting on a piece of Very Vanilla cardstock using Rich Razzleberry ink.  Create a banner at one end
  2. Cut your notecard in half along the score line.  keep the card front piece and place the back piece aside.  This can be used on another project
  3. Cut the 6 distinct patterns from one 12″ x 12″ sheet evenly.  Place pattern over the top note card front using liquid adhesive
  4. Stick the matted notecard to the front of the Rich Razzleberry cardbase flush to the top of the cardbase leaving equal borders along the left, right and bottom
  5. Die cut a small heart from the Be Mine Stitched framelit dies onto a scrap piece of Grapefruit Grove CS
  6. Lay piece of Gold Sequin trim across the center approx 2″ down from the top
  7. Adhere heart to card front using Stampin’ Dimensionals.  Adhere the greeting using Stampin’ Dimensionals.  Adhere the greeting using Stampin’ Dimensionals, overlapping on the heart die cut.
  8. Embellish with Faceted Dots.  You’re Done!

Facebook Live (Replay) 

You can watch the replay below.

Tricks & Tips

  • Learn how to create a standard card base HERE

Supplies

I often get questions about what supplies I use in videos. To make it easier for my blog friends, all supplies are listed below! 🙂 click on the image you can purchase directly from my online store
Product List

Faceted Dots

$10.50

Be sure to like my Facebook page to view these tutorials live each week. HERE

Just for You Greeting Card

Just for You Greeting Card

For today’s project we’re creating  quick and simple card using Meant to Be Stamp set and coordinating Be Mine Stitched Framelits.

200219 - Meant to Be

Supplies:

  • Stamps – Meant To Be
  • Ink – Memento Black Ink
  • Paper – Lovely Lipstick, Flirty Flamingo CS, All My Love DSP
  • Other – Be Mine Stitched Framelit Dies, Big Shot, All My Love ribbon pack, Basic Pearls

Dimensions:

  • Lovely Lipstick  CS – 8-1/4” x 5-7/8” (21 x 15cm) scored and fold at 4-1/8” (10.5cm) to create a cardbase
  • Flirty Flamingo CS – 5-3/4″ x 4″ (2 pieces)
  • All My Love DSP – 5-5/8″″ x 3-7/8″

Directions:

  1. Die cut heart shape from DSP in the bottom right corner
  2. Adhere die cut piece to Flirty Flamingo CS using liquid adhesive, place the heart die over the gap and die cut again
  3. Adhere matted CS to Lovely Lipstick cardbase and die cut heart shape again
  4. Adhere Flirty Flamingo CS to inside of cardbase
  5. Stamp greeting through the heart shape hole onto Flirty Flamingo CS inside using Black ink
  6. Decorate with a strip of pearls under greeting
  7. Tie ribbon in a bow on the left side of cut out heart shape.  You’re Done!

200219 - Meant to Be

Facebook Live (Replay) 

You can watch the replay below.

Tricks & Tips

  • Learn how to create a standard card base HERE
  • Learn tips for using coordinating Stamps and Dies in your cardmaking HERE

Supplies

I often get questions about what supplies I use in videos. To make it easier for my blog friends, all supplies are listed below! 🙂 click on the image you can purchase directly from my online store

Big Shot

$159.00

Be sure to like my Facebook page to view these tutorials live each week.  HERE

Happy Valentine’s Day Project Tutorial

Happy Valentine’s Day Project Tutorial

Today’s Valentine’s Day project featured the Meant to Be Stamp set from the Occasions Catalogue.

My goal is to go live every Wednesday morning at 10am AEST on my Kristy Coromandel Facebook Page .  If you’re unable to join me live, I will upload the recording to my blog afterwards.

060219 - Meant to Be Valentines Project Tutorial

Supplies:

  • Stamps – Meant to Be
  • Ink – Memento Black Ink
  • Paper – Whisper White CS,  Crumb Cake CS, Lovely Lipstick CS, All My Love DSP
  • Other – Double Sided adhesive, Stampin’ Dimensional’s, Heart Epoxy Droplets, Lovely Lipstick Dark Stampin’ Blend, corner rounder punch, Be Mine Stitched Framelits, Big Shot

Dimensions:

  • Crumb Cake CS – 8-1/4” x 5-7/8” (21 x 15cm) scored and fold at 4-1/8” (10.5cm) to create a cardbase
  • Whisper White CS – 2-3/4″x 1-1/4″
  • Lovely Lipstick CS – 6″ x 1″
  • All My Love DSP – 6″ x 2″

Directions:

  1. Stamp greeting in Black ink just to the right side of Whisper White CS, round the corners with a corner rounder punch, set aside.
  2. Die cut 2 x  border piece with Lovely Lipstick CS using Big shot machine
  3. Adhere die cut borders to the length of DSP with liquid adhesive.  Adhere matted DSP to card base approx 3/4″ in from the left side
  4. Die cut 1 x heart with Lovely Lipstick CS using Big Shot machine
  5. Adhere greeting to bottom right with Stampin’ Dimensionals, Adhere the heart die cut to the left of greeting using Stampin’ Dimensionals.
  6. Colour Heart Epoxy droplets with dark Lovely Lipstick Blends and adhere to the end of the greeting as shown in picture.  You’re done!

Facebook Live (Replay) 

You can watch the replay below.

Tricks & Tips

  • If you don’t have Stampin’ Blends or Epoxy droplets you can add your heart by drawing with a Stampin’ Write Marker
  • Learn how to create a standard card base HERE

Supplies

I often get questions about what supplies I use in videos. To make it easier for my blog friends, all supplies are listed below! 🙂 click on the image you can purchase directly from my online store

Don’t forget to sign up for my mailing list HERE I will be emailing you the products and measurements if you want to follow along each week.